| Sr. No. | Faculty Name | Trainings Attended by Faculty |
|---|---|---|
| 1 | Upendra Bhoi | 2/4/2018 to 12/4/2018 |
| 2 | Yogeshkumar Madhubhai Bhoya | Effective Classroom Communication |
| 3 | Dr.Hemang Suryakant Pandya | FDP on "Beyond the classroom towards excellence" Organized by IITE and DTE jointly. |
| 4 | Upendra Bhoi | 03/02/2020 to 14/02/2020 |
| 5 | Upendra Bhoi | 30/7/2018 to 10/8/2018 |
| 6 | Nilam B Panchal | Inductive Teaching and Learning training |
| 7 | Dr. UTPAL VINODCHANDRA SHAH | Outcome Based Education and Accreditation |
| 8 | Dr. UTPAL VINODCHANDRA SHAH | W6 - Development and use of rubric for effective assessment |
| 9 | Dr. UTPAL VINODCHANDRA SHAH | W12 - Action plan to prepare institute for accreditation |
| 10 | Dr. Mayank I. Vyas | RECENT TRENDS IN MANUFACTURING SYSTEM |
| 11 | Kalpesh V Vaghela | Applied Computational Fluid Dynamics for Automotive, Space and Defence Sector organized by ADIT, V V Nagar |
| 12 | Kalpesh V Vaghela | Muffler Acoustics for Automotive Engine Noise Control organized by IIT Kanpur |
| 13 | Mital Patel | Fundamental of Combustion |
| 14 | Rahul Bipinchandra Shah | Accreditation for Undergraduate Engineering Programmes |
| 15 | Dr. UTPAL VINODCHANDRA SHAH | UDAYAM (Unlimited Digital Advanced Yearlong Academic Method of Learning) E - Content Development Course |
| 16 | Hetalkumar I Chaudhari | COMPREHENSIVE ONLINE INTELLECTUAL PROPERTY RIGHTS (IPR) |
| 17 | Dr. Ankit J Patel | beyond the classroom towards excellence |
| 18 | Hetalkumar I Chaudhari | UDAYAM (Unlimited Digital Advanced Yearlong Academic Method of Learning) E-Content Development Course by KCG, Gujarat |
| 19 | Safvan Vahora | Two week equivalent Faculty Development Program on Problem solving through Programming In C attended during 27/01/2020 to 17/04/2020 (12 week) organised SWAYAM-NPTEL online course. |
| 20 | Prof. Milap M Madhikar | Comprehensive Online Intellectual Property Rights |
| 21 | Rahul Bipinchandra Shah | ATAL Academy Online FDP Training on Green Technology & Sustainable Engineering |
| 22 | Rahul Bipinchandra Shah | Certificate Course on Comprehensive Online Intellectual Property Rights Organized by I-Hub |
| 23 | Rahul Bipinchandra Shah | online UDAYAM (Unlimited Digital Advanced Yearlong Academic Method of Learning) E-Content Development Course jointly organised by Knowledge Consortium of Gujarat, Ahmedabad and HRDC, Gujarat University. |
| 24 | Dr. Hirenkumar Rameshbhai Prajapati | Experimental Stress Analysis (FDP) |
| 25 | Dr. Hirenkumar Rameshbhai Prajapati | COMPREHENSIVE ONLINE INTELLECTUAL PROPERTY RIGHTS (IPR) |
| 26 | Dr. Bharat C. Khatri | NBA Accreditation |
| 27 | Dr. Kuntesh K Jani | STC on SECC |
| 28 | Prof. BHUNGA MURADBHAI MAHMEDBHAI | TEACHING IN UNCERTAIN TIMES: OPPORTUNITIES AND CHALLANGES BY GTU, AHMEDABAD AND BITS, VADODARA |
| 29 | Mital Patel | Green Technology and Sustainibility Engineering |
| 30 | Hetalkumar I Chaudhari | Recent Trends in Automobile Engineering |
| 31 | HIRENKUMAR RAMANBHAI PATEL | Problem solving through programming in C |
| 32 | Mital Patel | Online Short Term Course on "LaTeX" |
| 33 | HIRENKUMAR RAMANBHAI PATEL | Cloud computing |
| 34 | Piyushkumar M. Mistri | Certificate Course on "Comprehensive Online Intellectual Property Rights (IPR)" |
| 35 | Piyushkumar M. Mistri | Unlimited Digital Advanced Yearlong Academic Method of Learning (E-content development course) |
| 36 | Mital Patel | COMPREHENSIVE ONLINE INTELLECTUAL PROPERTY RIGHTS (IPR) |
| 37 | Prof.Pradipkumar Kiritkumar Gajjar | MOOC Course - Theory and Practice of Non Destructive Testing - Organized by NPTEL-AICTE (IIT Madras) |
| 38 | Mital Patel | Teacher Support Program - workshop |
| 39 | Prof.Pradipkumar Kiritkumar Gajjar | MOOC Course - Welding Processes - Organized by NPTEL-AICTE (IIT Madras) |
| 40 | Mital Patel | Orientation on Linguaskill |
| 41 | Mital Patel | Steam and Gas Power Systems |
| 42 | Kalpesh V Vaghela | COMPREHENSIVE ONLINE INTELLECTUAL PROPERTY RIGHTS (IPR) by i-Hub |
| 43 | Kalpesh V Vaghela | UDAYAM (Unlimited Digital Advanced Yearlong Academic Method of Learning) E-Content Development Course by KCG, Gujarat |
| 44 | Prof.Rinkalben J. Prajapati | InductionPhase-II |
| 45 | Prof. Milap M Madhikar | Faculty Development for Design Engineering Level 1 |
| 46 | Prof. Milap M Madhikar | Faculty Development Program (Beyond the Classroom towards excellence) |
| 47 | Avinash D. Chaudhari | Induction Programme Phase I |
| 48 | Prof.Binita.A.Vyas | NBA Acreditation |
| 49 | Prof.Binita.A.Vyas | Application of Geo synthetics for Infrastructural Development |
| 50 | Darshan Upendrabhai Thakar | IP-1 |
| 51 | Dr. Bharat C. Khatri | Research Methodology: Tools & Techniques |
| 52 | Dr. Bharat C. Khatri | Recent Trends in CAD/CAM |
| 53 | Sameer H. Mansuri | Real-time and Embedded Systems |
| 54 | Sameer H. Mansuri | Induction Phase-I |
| 55 | Sameer H. Mansuri | FDP on Design Engineering (Level 1) |
| 56 | PATEL NIRAVKUMAR DINESHBHAI | Image Processing using VLSI Architectures |
| 57 | PATEL NIRAVKUMAR DINESHBHAI | Real Time Embedded Systems |
| 58 | Hiren Dinker Mehta | NBA Accreditation |
| 59 | Prof. BHUNGA MURADBHAI MAHMEDBHAI | ANALYSIS AND DESIGN OF STRUCTTURE USING STAAD. PRO SOFTWARE ORGANIZED BY GKS. |
| 60 | Kalpesh V Vaghela | Faculty development program by SSIP cell |
| 61 | Kalpesh V Vaghela | Induction program phase-II |
| 62 | Kalpesh V Vaghela | NBA accreditation |
| 63 | Dr. Umesh Kumar Khare | Accreditation of engineering programs |
| 64 | Prof. Nisha V Bora | APPLICATIONS OF OPTIMIZATION TECHNIQUES IN ENGINEERING FOR RESEARCH |
| 65 | SAGAR DHARMENDRA AMBALAL | Finite Element Analysis, Finite Element Methods (CE-7) |
| 66 | SAGAR DHARMENDRA AMBALAL | Applications of Artificial Intelligence (AI) Techniques for Research in Engineering |
| 67 | JAYKUMAR PRAMODCHANDRA PANDYA | AICTE approved FDP on Induction Program. |
| 68 | Jyoti Iyer | NBA Accreditation |
| 69 | SANJAY PRAHLADBHAI PATEL | RECENT TRENDS IN CAD/CAM |
| 70 | Dr. Hirenkumar Rameshbhai Prajapati | Industrial Based NDT Training & Practices |
| 71 | Dr. Hirenkumar Rameshbhai Prajapati | Induction Phase -I |
| 72 | Dr. Hirenkumar Rameshbhai Prajapati | NBA Accreditation |
| 73 | Hitesh L. Desai | Two week Induction Phase-I Training |
| 74 | HIRENKUMAR RAMANBHAI PATEL | Advanced .NET and c# |
| 75 | HIRENKUMAR RAMANBHAI PATEL | Introduction To Machine Learning |
| 76 | Dr. Mayank I. Vyas | Advances in Heating, ventilation and Air conditioning. |
| 77 | Piyushkumar M. Mistri | FDP on "Beyond the Classroom Towards Excellence" |
| 78 | Prof.Pradipkumar Kiritkumar Gajjar | MOOC Course - Welding of Advanced High Strength Steels for Automotive Applications organized by NPTEL-AICTE (IIT Madras) |
| 79 | Prof.Pradipkumar Kiritkumar Gajjar | MOOC Course - Welding Metallurgy organized by NPTEL-AICTE (IIT Roorkee) |
| 80 | Prof.Pradipkumar Kiritkumar Gajjar | Advanced Welding Processes for Titanium and Aluminum alloys |
| 81 | Prof.Rinkalben J. Prajapati | Operating System and Concepts |
| 82 | Pradeep Rohitbhai Gamit | Recent Trend in Computer and Information Technology |
| 83 | Pradeep Rohitbhai Gamit | Design and Implementation of Relational Databases |
| 84 | Pradeep Rohitbhai Gamit | Induction Phase 1 (IP4) |
| 85 | Pradeep Rohitbhai Gamit | A practical approach to learn Computer Networks |
| 86 | Prof. Milap M Madhikar | FACULTY INDUCTION PROGRAM |
| 87 | Prof. Samruddhi Patel | Student Evaluation and Assesment |
| 88 | JAYKUMAR PRAMODCHANDRA PANDYA | Faculty Development Program (FDP) (Basic Level 1) for Design Engineering |
| 89 | JAIMIN M SHROFF | Digital System Architecture Using Verilog HDL |
| 90 | JAIMIN M SHROFF | Recent Trends in Computer and Information Technology |
| 91 | JAIMIN M SHROFF | A Practical Approach to learn a Computer Network |
| 92 | Prof. K S Banker | Emerging Trend in Major Thrust area of Mechanical Engineering |
| 93 | Shreyaskumar Gangarambhai Patel | Attended Two Week STTP on "Induction Programme (Phase-1)" at NITTTR Bhopal, from 22.10.2018 to 02.11.2018 |
| 94 | Shreyaskumar Gangarambhai Patel | Attended One Week STTP on "Recent trends in computer and information technology" at Government Engineering College, Modasa, from 02.04.2018 to 12.04.2018 |
| 95 | Rathod Vimalkumar Ashokbhai | Recent Trend in Computer and Information Technology by Video Conference from DTE |
| 96 | Dr. Bharat C. Khatri | FDP Beyond the classromm towards excellence |
| 97 | Sameer H. Mansuri | VLSI front end design flow using Cadence tools |
| 98 | Sameer H. Mansuri | Data communication network |
| 99 | Dr. Bhaumik R Shah | Tendering and Contract Management in Institute |
| 100 | Dr. B J Shah | Wind resistant design of structure |
| 101 | PATEL NIRAVKUMAR DINESHBHAI | Digital Signal Processing |
| 102 | PATEL NIRAVKUMAR DINESHBHAI | Digital System Architecture using Verilog HDL |
| 103 | PATEL NIRAVKUMAR DINESHBHAI | Advanced Satellite Communication |
| 104 | PATEL NIRAVKUMAR DINESHBHAI | Device Modeling and Circuit Simulation for Integrated Circuit Designs |
| 105 | PATEL NIRAVKUMAR DINESHBHAI | Spectrum of Electronics and Communication Engineering and Emerging Technologies |
| 106 | Dr. Kuntesh K Jani | Advanced Medical Imaging: Wireless Endoscopy Analysis |
| 107 | Prof. BHUNGA MURADBHAI MAHMEDBHAI | EMERGING TRENDS IN STRUCTURAL & GEOTECHNICAL ENGINEERING ORGANIZED BY DTE, GANDHINAGAR |
| 108 | Kalpesh V Vaghela | FDP on Design engineering |
| 109 | Kalpesh V Vaghela | FDP organized by IITE |
| 110 | Dr. Umesh Kumar Khare | Advances in Infrastructure Engineering & Management |
| 111 | SAGAR DHARMENDRA AMBALAL | FDP on Student Induction Program Phase-1 |
| 112 | SAGAR DHARMENDRA AMBALAL | FDP on Student Induction Program Phase-2 |
| 113 | SANJAY PRAHLADBHAI PATEL | Advancing in refrigeration and air conditioning |
| 114 | Rahul Bipinchandra Shah | First Course in Computational Fluid Dynamics: Development, Application and Analysis (FCCFD-2018) |
| 115 | Mital Patel | Emerging Trend in Major Thrust Areas of Mechanical Engineering |
| 116 | Dr. Hirenkumar Rameshbhai Prajapati | Recent Trends in Material Processing and Characterization |
| 117 | Dr. Hirenkumar Rameshbhai Prajapati | Design engineering FDP (level -1 |
| 118 | Dr. Jigar Chhanabhai Gamit | Emerging Trend in Major Thrust area of Mechanical Engineering |
| 119 | Yogeshkumar Madhubhai Bhoya | Emerging Trend in major thrust areas of Mechanical Engineering |
| 120 | Hitesh L. Desai | Online training on " Spectrum of Electronics and Communication Engineering and Emerging Technologies" Through V.C equivalent to One week STTP, Organized by DTE, Gandhinagar |
| 121 | Hitesh L. Desai | Under A.I.P Scheme, one week STTP on "Digital Signal Processing" |
| 122 | Hitesh L. Desai | Under A.I.P Scheme, one week STTP on "A Practical Approach to Learn Computer Networks " |
| 123 | Hetalkumar I Chaudhari | Emerging Trend in Major Thrust Areas of Mechanical Engineering |
| 124 | Hetalkumar I Chaudhari | Induction Phase-II |
| 125 | Piyushkumar M. Mistri | STTP on Emerging Trend in major thrust areas of Mechanical Engineering |
| 126 | Farediwala Mo Usama A | Emerging trends in structural & geotechnical Engineering |
| 127 | Prof.Pradipkumar Kiritkumar Gajjar | Emerging Trend in major thrust areas of Mechanical Engineering |
| 128 | Prof.Rinkalben J. Prajapati | InductionPhase-I |
| 129 | Prof.Rinkalben J. Prajapati | Advance Topics in C and C++ |
| 130 | Dr. N. G. RAVAL | Statistical Analysis for Scientific & Technical Research & Applications |
| 131 | Dr. N. G. RAVAL | Soft Computing Techniques in Transportation Engineering |
| 132 | Dr. Mahesh M. Goyani | Attended Two Week STTP on "Application of Optimization Techniques in Engineering for Research" at Government Engineering College, Modasa, from 02.01.2017 to 13.01.2017 |
| 133 | Dr. Mahesh M. Goyani | Attended One Week Summer School on "Cyber-Physical Systems - Theory and Applications" at DAIICT, Gandhinagar from 08-04-2017 to 12-04-2017. |
| 134 | Prof. Milap M Madhikar | ORGANIZATIONAL EFFECTIVENESS |
| 135 | Rathod Vimalkumar Ashokbhai | Induction Phase-1 |
| 136 | Rathod Vimalkumar Ashokbhai | Faculty Development Program |
| 137 | hjspbouh | STTP-APPLICATION OF OPTIMIZATION TECHNIQUES IN ENGINEERING FOR RESEARCH |
| 138 | hjspbouh | Induction Phase-1 Training |
| 139 | Pradeep Rohitbhai Gamit | STTP-APPLICATION OF OPTIMIZATION TECHNIQUES IN ENGINEERING FOR RESEARCH |
| 140 | Shreyaskumar Gangarambhai Patel | Attended Two Week STTP on "Application of Optimization Techniques in Engineering for Research" at Government Engineering College, Modasa, from 02.01.2017 to 13.01.2017 |
| 141 | Piyushkumar M. Mistri | STTP on "Applications of Optimization Techniques in Engineering for Research |
| 142 | Prof. Samruddhi Patel | Developing Entrepreneurship Skills in Students |
| 143 | Prof.Binita.A.Vyas | Woman Empowerment |
| 144 | Prof.Binita.A.Vyas | GSDMA |
| 145 | Prof.Binita.A.Vyas | SSIP Onwards |
| 146 | Prof.Binita.A.Vyas | UK & TEQIP Colleges |
| 147 | Dr. G. C. Panchal | STTP on Introduction to Boundary Element Method From 09/01/2017 TO 13/01/2017 |
| 148 | Dr. G. C. Panchal | Short course on Teaching Methodologies for Engineering Mathematics From 15/02/2017 TO 17/02/2017 |
| 149 | KHATRI RAJESHKUMAR P | Attended One Week Training Programme on "Data Analysis and Report Writing" at NITTTR, Bhopal during 12-06-2017 to 16-06-2017 |
| 150 | Chetankumar Kohyabhai Bariya | Induction Phase-I |
| 151 | Chetankumar Kohyabhai Bariya | STTP on Application of Optimization Techniques in Engineering For Research |
| 152 | NIRALI V. UPADHYAY | APPLICATIONS OF OPTIMIZATION TECHNIQUES IN ENGINEERING FOR RESEARCH |
| 153 | hjspbouh | VC BASED STTP ON RECENT ADVANCES IN CIVI ENGINEERING |
| 154 | PATEL NIRAVKUMAR DINESHBHAI | APPLICATIONS OF OPTIMIZATION TECHNIQUES IN ENGINEERING FOR RESEARCH |
| 155 | PATEL NIRAVKUMAR DINESHBHAI | LABVIEW SOFTWARE |
| 156 | Dr. Ankit J Patel | Induction Phase-I |
| 157 | Dr. Ankit J Patel | APPLICATIONS OF OPTIMIZATION TECHNIQUES IN ENGINEERING FOR RESEARCH |
| 158 | Prof. K S Banker | INDUCTION PHASE-1 |
| 159 | Prof. K S Banker | INDUCTION PHASE-2 |
| 160 | Prof. K S Banker | Application of optimization techniques in engineering for research. |
| 161 | Prof. BHUNGA MURADBHAI MAHMEDBHAI | INDUCTION PHASE-I |
| 162 | SHIVENDRA KUMAR JHA | GEOTECHNICAL INVESTIGATION FOR INFRASTRUCTURE DEVELOPMENT |
| 163 | Dr. Bhaumik R Shah | Optimization technique |
| 164 | Dr. Kuntesh K Jani | Cyber Physical Systems (CPS): Theory and Applications |
| 165 | Kalpesh V Vaghela | STTP on "Applications of Optimization Techniques in Engineering for Research” |
| 166 | Kalpesh V Vaghela | Induction program phase-I |
| 167 | Prof. Nisha V Bora | APPLICATIONS OF OPTIMIZATION TECHNIQUES IN ENGINEERING FOR RESEARCH |
| 168 | SAGAR DHARMENDRA AMBALAL | Applications of Optimization Techniques in Engineering for Research |
| 169 | SAGAR DHARMENDRA AMBALAL | Monitoring Cyclone through Remote Sensing with Special emphasis on Gujarat Coast |
| 170 | SAGAR DHARMENDRA AMBALAL | NBA Accreditation & Academic Audit |
| 171 | Jyoti Iyer | “Applications of Optimization Techniques in Engineering for Research” |
| 172 | Dr. Hirenkumar Rameshbhai Prajapati | Applications of Optimization Techniques in Engineering For Research |
| 173 | Hetalkumar I Chaudhari | Induction Phase-I |
| 174 | Prof.Pradipkumar Kiritkumar Gajjar | APPLICATIONS OF OPTIMIZATION TECHNIQUES IN ENGINEERING FOR RESEARCH |
| 175 | Dr. N. G. RAVAL | Innovative Product Design |
| 176 | Dr. N. G. RAVAL | Sustainable Development using Green Technology |
| 177 | Dr. Mahesh M. Goyani | Attended One Week STTP on "Use of Blog in Teaching Learning" at NITTTR, Bhopal from 06.06.2016 to 10.06.2016 |
| 178 | Prof. Milap M Madhikar | 3-D MODELLING |
| 179 | Prof. Milap M Madhikar | CNC CONTROLLER PROGRAMMING |
| 180 | hjspbouh | Open Source Technoloies & Solutions for Engineering and science |
| 181 | JAIMIN M SHROFF | STTP-APPLICATION OF OPTIMIZATION TECHNIQUES IN ENGINEERING FOR RESEARCH |
| 182 | Prof. Samruddhi Patel | Future Trends in Renewable Energy Sources |
| 183 | DIPAKKUMAR H SAHAY | MATHEMATICAL TOOLS AND TECHNIQUES FOR ENGINEERING RESEARCH |
| 184 | Prof.Binita.A.Vyas | Conclave (Vibrant) |
| 185 | GIRISHKUMAR N LIMBAD | Use of Blog in Teaching Learning |
| 186 | Dr. G. C. Panchal | FDP on E-Content Development From 01/01/2016 TO 07/01/2016 |
| 187 | Dr. G. C. Panchal | STTP on Mathematical Tools and Techniques for Engineering Research From 30/05/2016 TO 03/06/2016 |
| 188 | Dr. G. C. Panchal | STTP on Numerical Computation by Programming From 20/06/2016 TO 24/06/2016 |
| 189 | Dr. G. C. Panchal | STTP on Mathematical Analysis for Engineering From 03/11/2016 TO 12/11/2016 |
| 190 | KHATRI RAJESHKUMAR P | Attended One Week Training Programme on "Chromatographic Methods" at NIITTTR, Bhopal during 28-11-2016 to 02-12-2016 |
| 191 | NIRALI V. UPADHYAY | INDUCTION TRAINIG PROGRAM,PHASE-II |
| 192 | NIRALI V. UPADHYAY | FUTURE TRENDS IN RENEWABLE ENERGY SOURCES |
| 193 | Dr. Ankit J Patel | ADVANCE AUTOCAD FOR CIVIL ENGINEERING |
| 194 | Dr. Dipak J. Prajapati | E-Content Development |
| 195 | Dr. Dipak J. Prajapati | FDP on Entrepreneurship Development |
| 196 | Dr. Dipak J. Prajapati | Mathematical Analysis For Engineering |
| 197 | Dr. Bharat C. Khatri | Engineering Application of Textiles and Functional Clothing |
| 198 | Dr. Bharat C. Khatri | Mainstreaming Disaster Risk Reduction in Science & Technology Sector |
| 199 | Dr. Kuntesh K Jani | STC on Wireless Sensor Network |
| 200 | Hiren Dinker Mehta | Hands on experience on Siemens AC-DC drives & PLC |
| 201 | SAGAR DHARMENDRA AMBALAL | Developing Entreprenaurship Skills |
| 202 | Jyoti Iyer | Emerging Research trends in computational intelligence, theory and applications |
| 203 | SANJAY PRAHLADBHAI PATEL | Future Trends In Renewable Energy Sources |
| 204 | Rahul Bipinchandra Shah | Future Trends in Renewable Energy Sources |
| 205 | HIRENKUMAR RAMANBHAI PATEL | Mathematical Tools and Techniques for Engineering Research |
| 206 | HIRENKUMAR RAMANBHAI PATEL | Understading Fundamental Tradeoffs in Computer Design and Organization |
| 207 | Dr. VIPULKUMAR JESHANKER UPADHYAY | INTRODUCTION TO ELECTRICAL LABORATORY- COE 2016 |
| 208 | Dr. N. G. RAVAL | MATLAB and GIS Application |
| 209 | Dr. Mahesh M. Goyani | Attended Two Week STTP on "Design and Development of Dynamic Website" at NITTTR Center, Ahmedabad from 07.12.2015 to 18.12.2015 |
| 210 | Prof. Milap M Madhikar | INDUCTION TRAINING PHASE 2 |
| 211 | Prof. Milap M Madhikar | TEQUIP-II SPONSORED |
| 212 | Prof. Milap M Madhikar | TEQUIP-II SPONSORED |
| 213 | hjspbouh | Optimization: Theory and Engineering Practice |
| 214 | Prof. Samruddhi Patel | Siemens Controller & CIM |
| 215 | Prof. Samruddhi Patel | CAD, Advance Simulation and Manufacturing Using NX Software |
| 216 | DIPAKKUMAR H SAHAY | ENGINEERING PHYSICS |
| 217 | DIPAKKUMAR H SAHAY | ENVIRONMENTAL STUDIES |
| 218 | DIPAKKUMAR H SAHAY | RESEARCH METHODOLOGY |
| 219 | GIRISHKUMAR N LIMBAD | Enhancing Communication Skills Using Language Lab |
| 220 | GIRISHKUMAR N LIMBAD | Induction Phase II |
| 221 | GIRISHKUMAR N LIMBAD | Faculty Development Programme |
| 222 | Dr. G. C. Panchal | Short term course on MATHEMATICAL MODELLNG AND NUMERICAL COMPUTATION USING MATLAB From 09/02/2015 TO 13/02/2015 |
| 223 | KHATRI RAJESHKUMAR P | Attended Two Week Training programme "Indiction Phase-II" at RCTI, NITTTR Extention center,Ahmedabad during 02-02-2015 to 13-02-2015 |
| 224 | KHATRI RAJESHKUMAR P | Attended One Week STTP on "Building Materials chara- cterization and testing" at MNIT, Jaipur during 01-06-2015 to 05-06-2015 |
| 225 | NIRALI V. UPADHYAY | RECENT DEVELOPMENTS IN VLSI AND IMAGE PROCESSING |
| 226 | NIRALI V. UPADHYAY | FACULTY DEVELOPMENT PROGRAMME |
| 227 | PATEL NIRAVKUMAR DINESHBHAI | Shaping Technical Education to meet the chalanges beyond 2020 |
| 228 | PATEL NIRAVKUMAR DINESHBHAI | MATLAB SOFTWARE WITH CONTROL SYSTEM |
| 229 | Prof. Dinesh B. Sathavara | Patent search and technology land scaping |
| 230 | Dr. Bharat C. Khatri | Shaping Technical Education to meet the challenge beyond 2020 |
| 231 | Dr. Bharat C. Khatri | Action Research for System’s Development |
| 232 | Dr. Bharat C. Khatri | Siemens Controllers & CIM |
| 233 | Dr. Bharat C. Khatri | CAD, Advance simulation and Manufacturing using NX software |
| 234 | Dr. Bharat C. Khatri | Programmable Logic Controller and Process Instrumentation |
| 235 | Dr. Bharat C. Khatri | Engineering Equation Solver for Engineers |
| 236 | Dr. Bhaumik R Shah | Application of GIS and Remote sensing |
| 237 | Dr. Kuntesh K Jani | Induction Training Program phase-II |
| 238 | Dr. Kuntesh K Jani | Achieving Academic Excellence |
| 239 | Dr. Kuntesh K Jani | Research Methodology |
| 240 | Kalpesh V Vaghela | Ashtvinayak technocrafts pvt ltd |
| 241 | Prof. Nisha V Bora | Siemens Controller and CIM |
| 242 | SAGAR DHARMENDRA AMBALAL | Optimization: Theory and Engineering Practice |
| 243 | Jyoti Iyer | Siemens Controller and CIM |
| 244 | SANJAY PRAHLADBHAI PATEL | Siemens Controller & CIM |
| 245 | SANJAY PRAHLADBHAI PATEL | CAD, Advance Simulation and Manufacturing Using NX Software |
| 246 | Rahul Bipinchandra Shah | Induction Training Programme Phase-II |
| 247 | Rahul Bipinchandra Shah | Two Week Summer School on Thermodynamics |
| 248 | Dr. VIPULKUMAR JESHANKER UPADHYAY | MATLAB AND GIS APPLICATIONS |
| 249 | Dr. VIPULKUMAR JESHANKER UPADHYAY | CIRCUIT DESIGN & SMART GRID |
| 250 | Dr. VIPULKUMAR JESHANKER UPADHYAY | OPTIMIZATION: THEORY AND ENGINEEING PRECTICE ( OptiTEP-2015) |
| 251 | Prof.Binita.A.Vyas | Optimization-theory and engineering practice |
| 252 | Prof.Binita.A.Vyas | International Symposium on Reducing Earthquake Losses |
| 253 | Prof.Binita.A.Vyas | Shaping Technical Education to meet the challenges Beyond 2020 |
| 254 | PATEL NIRAVKUMAR DINESHBHAI | Faculty Development Program for Design Engineering |
| 255 | Dr. Mahesh M. Goyani | Industrial Visit to Institute of Plasma Research (IPR) on 22-04-2014 |
| 256 | JIGAR KANAIYALAL SATHAWARA | INDUCTION PHASE-1 |
| 257 | hjspbouh | Induction Phase-I |
| 258 | Prof. Samruddhi Patel | Induction Training Programme Phase -I |
| 259 | Prof. Samruddhi Patel | Workshop On Research Methodology |
| 260 | FADADU KUNALKUMAR VINODBHAI | CORE TEACHING SKILL |
| 261 | GIRISHKUMAR N LIMBAD | Induction Phase I |
| 262 | Dr. G. C. Panchal | SCHOOL OF MECHANICS & APPLIED MATHEMATICS From 19/07/2014 TO 23/07/2014 |
| 263 | KHATRI RAJESHKUMAR P | Attended One Week STTP on "Nanotechnology and Nano electronic devices" at NIITTTR, Bhopal during 25-08-2014 to 29-08-2014 |
| 264 | NIRALI V. UPADHYAY | MODELLING AND ANALYSIS OF ELECTRICAL SYSTEM |
| 265 | NIRALI V. UPADHYAY | INDUCTION TRAINIG PROGRAM,PHASE-1 |
| 266 | NIRALI V. UPADHYAY | APPLIED DIGITAL SIGNAL PROCESSING |
| 267 | PATEL NIRAVKUMAR DINESHBHAI | Conclave on Electrical Sciences |
| 268 | PATEL NIRAVKUMAR DINESHBHAI | INDUCTION PHASE-2 |
| 269 | PATEL NIRAVKUMAR DINESHBHAI | ANALOG ELECTRONICS |
| 270 | PATEL NIRAVKUMAR DINESHBHAI | MATLAB PROGRAMMING |
| 271 | Dr. Dipak J. Prajapati | Induction Training Programme Phase-I |
| 272 | Dr. Dipak J. Prajapati | CFT, Modelling, Simulations and Algorithma |
| 273 | Dr. Bharat C. Khatri | Transforming Technical Education for Excellence |
| 274 | Dr. Bharat C. Khatri | Computational Methods in Engineering using MATLAB |
| 275 | Dr. Bharat C. Khatri | Quality Research for PhD & ME Students |
| 276 | Bhatiya Sanketkumar Ashokbhai | CORE TEACHING SKILL |
| 277 | Dr. Bharat C. Khatri | Maintenance Management in Industries |
| 278 | Bhatiya Sanketkumar Ashokbhai | KARMYOGI TALIM |
| 279 | Dr. Bharat C. Khatri | NX-Essentials for NX Designers |
| 280 | Dr. Bhaumik R Shah | Karmayogi Residential Training for Quality Improvement Program in Technical Eduction |
| 281 | Dr. Bhaumik R Shah | Soil Testing & Lab Manual development |
| 282 | Dr. Kuntesh K Jani | Computational Methods in Engineering using MATLAB |
| 283 | Dr. Kuntesh K Jani | Induction Training Program Phase-I |
| 284 | Dr. Kuntesh K Jani | Strategy Leadership & Change Management |
| 285 | Dr. Kuntesh K Jani | Administrative Training |
| 286 | Kalpesh V Vaghela | Jh-weltec india ltd |
| 287 | Hiren Dinker Mehta | Advanced Engineering Optimization Through Intelligent Techniques |
| 288 | Kalpesh V Vaghela | STTP on " Control System" organized by IIT kharagpur |
| 289 | Kalpesh V Vaghela | STTP on "main workshop on Fluid mechanics" organized by IIT kharagpur |
| 290 | Prof. Nisha V Bora | Workshop on leadership exposure |
| 291 | SAGAR DHARMENDRA AMBALAL | Managerial Skills for Technical Teachers & Administrators |
| 292 | SAGAR DHARMENDRA AMBALAL | Earthquake Engineering and Building Codes |
| 293 | SAGAR DHARMENDRA AMBALAL | Research Paper Writing |
| 294 | SANJAY PRAHLADBHAI PATEL | Maitenance management in industries |
| 295 | Rahul Bipinchandra Shah | WORKSHOP ON ENERGY EFFICIENCY |
| 296 | Rahul Bipinchandra Shah | Two-week ISTE workshop on Fluid Mechanics |
| 297 | Rahul Bipinchandra Shah | A Winter School on Renewable Energy Sources with Emphases on Wind and Solar Energy |
| 298 | HIRENKUMAR RAMANBHAI PATEL | Karmayogi |
| 299 | HIRENKUMAR RAMANBHAI PATEL | Pedagogy for Effective use of ICT in Engineering Education |
| 300 | Farediwala Mo Usama A | INDUCTION PHASE-1 |
| 301 | Dr. VIPULKUMAR JESHANKER UPADHYAY | ACADEMIC & RESEARCH PAPER WRITING |
| 302 | Prof.Binita.A.Vyas | FDP For Design Engineering |
| 303 | Dr. G. C. Panchal | WORKSHOP ON FLUID DYNAMICS From 30/12/2013 TO 03/01/2014 |
| 304 | Dr. Dipak J. Prajapati | Fluid Dynamics |
| 305 | Dr. Mahesh M. Goyani | Attended Two Week Induction Training - Phase I at NITTTR Extension Center, RCTI, Ahmedabad from 29.04.2013 to 10.05.2013 |
| 306 | Dr. Mahesh M. Goyani | Attended Three Days Residential Training (Karmyogi Talim) at Swaminarayandham, Gandhinagar from 12.12.2013 - 14.12.2013 |
| 307 | hjspbouh | Project Name: E college Environment:java Tools:Eclipse External Guide: Mr. Manoj Pandya (Project Scientist BISAG) |
| 308 | Prof. Milap M Madhikar | INDUCTION TRAINING PHASE 1 |
| 309 | Prof. Samruddhi Patel | Recent Trends in Automobile Engineering |
| 310 | Prof. Samruddhi Patel | FDP on Emerging Trends in Plastic Technology |
| 311 | Prof. Samruddhi Patel | Importance of CAD/CAM |
| 312 | Prof. Samruddhi Patel | Karmayogi Residential Training for Quality Improvement Program in Technical Education |
| 313 | DIPAKKUMAR H SAHAY | ACCREDITATION AND ACADEMIC AUDIT |
| 314 | Dr. G. C. Panchal | KARMAYOGI RESIDENTIAL TRAINING FOR QUALITY IMPROVEMENT PROGRAM IN TECHNICAL EDUCATION organized by CTE From 21/11/2013 TO 23/11/2013 |
| 315 | KHATRI RAJESHKUMAR P | Attended Two Week Training programme "Indiction Phase-I" at RCTI, NITTTR Extention center,Ahmedabad during 16-09-2013 to 27-09-2013 |
| 316 | NIRALI V. UPADHYAY | PROMOTION OF SMALL SCALE INDUSTRIES THROUGH ENTREPRENEURSHIP |
| 317 | hjspbouh | FDP(STTP) ON ENTREPRENEURSHIP DEVELOPEMENT |
| 318 | hjspbouh | INDUCTION TRAINING PROGRAMME PHASE-II |
| 319 | PATEL NIRAVKUMAR DINESHBHAI | KARMAYOGI RESIDENTIAL TRAINING FOR QUALITY IMPROVEMENT PROGRAM IN TECHNICAL EDUCATION |
| 320 | PATEL NIRAVKUMAR DINESHBHAI | Patent Search Methodology |
| 321 | Dr. Bharat C. Khatri | Workshop on Patent Search Methodology |
| 322 | Dr. Dipak J. Prajapati | Karmayogi Residential Training |
| 323 | Dr. Bharat C. Khatri | Faculty Development Programme on Entrepreneurship Development |
| 324 | Dr. Bharat C. Khatri | Recent Trends in Automobile Engineering |
| 325 | Dr. Bharat C. Khatri | Faculty Development Programme on Value Management |
| 326 | Dr. Bharat C. Khatri | KarmayogiResidental Training for Quality Improvement Program in Technical Education |
| 327 | Dr. Kuntesh K Jani | Karmyogi Training |
| 328 | Dr. Kuntesh K Jani | Computing Techniques to solve Engineering Problems |
| 329 | SAGAR DHARMENDRA AMBALAL | Geo Technical failures and Remedial actions |
| 330 | SAGAR DHARMENDRA AMBALAL | Geo Technical Engineering Principles & Practices |
| 331 | SAGAR DHARMENDRA AMBALAL | Karmyogi Talim Shibir |
| 332 | Rahul Bipinchandra Shah | Induction Training Program Phase -I |
| 333 | Jyoti Iyer | Karmayogi Residential training for Quality Improvement Program in Technical Education. |
| 334 | Rahul Bipinchandra Shah | Challenges in Measurement of Single and Two Phase Flow – Recent Trends |
| 335 | Dr. UTPAL VINODCHANDRA SHAH | Importance of CAD/CAM |
| 336 | Rahul Bipinchandra Shah | Karmayogi Residential Training for QIP in Technical Education |
| 337 | SANJAY PRAHLADBHAI PATEL | Recent Trends in Automobile Engineering |
| 338 | SANJAY PRAHLADBHAI PATEL | Importance of CAD/CAM |
| 339 | SANJAY PRAHLADBHAI PATEL | Karmayogi Residential Training for Quality Improvement Program in Technical Education |
| 340 | Dr. Mayank I. Vyas | RECENT TRENDS IN AUTOMOBILE ENGINEERING |
| 341 | Dr. Mayank I. Vyas | KARMAYOGI RESIDENTIAL TRAINING FOR QUALITY IMPROVEMENT PROGRAM IN TECHNICAL EDUCATION |
| 342 | Dr. N. G. RAVAL | Entrepreneurship Development – Faculty Development |
| 343 | Prof.Binita.A.Vyas | Karmayogi training |
| 344 | Prof.Binita.A.Vyas | Patent Search Methodology |
| 345 | Prof.Binita.A.Vyas | ICAI |
| 346 | PATEL NIRAVKUMAR DINESHBHAI | INDUCTION PHASE-1 |
| 347 | Dr. Mahesh M. Goyani | Attended One Week STTP on "Advance Java" under Faculty Development Program at TCS, Gandhinagar from 18.06.2012 to 22.06.2012 |
| 348 | hjspbouh | Faculty Development Program on Advance Java |
| 349 | hjspbouh | Embedded System Design |
| 350 | Dr. G. C. Panchal | INDUCTION TRAINING PROGRAMME PHASE-I From 13/02/2012 to 24/02/2012 |
| 351 | Dr. G. C. Panchal | WORKSHOP ON PEDAGOGY SESSIONS IN CALCULUS organized by GTU From 25/06/2012 TO 29/06/2012 |
| 352 | hjspbouh | RECENT TRENDS IN TRANSPORTATION ENGINEERING |
| 353 | Dr. Bharat C. Khatri | Research Methodology |
| 354 | Dr. Bhaumik R Shah | Soil Testing & Lab Manual development |
| 355 | Dr. UTPAL VINODCHANDRA SHAH | Accreditation and Academic Audit |
| 356 | HIRENKUMAR RAMANBHAI PATEL | Induction Training Phase 1 |
| 357 | Dr. Mayank I. Vyas | INDUSTRIAL PROCESS HEATING SYSTEMS |
| 358 | Dr. Mayank I. Vyas | INDUSTRIAL PROCESS HEATING SYSTEMS |
| 359 | Dr. N. G. RAVAL | Developments in Transport Infrastructure |
| 360 | Dr. N. G. RAVAL | Recent Trends in Transportation Engineering |
| 361 | Prof.Binita.A.Vyas | Fib Days-2011 |
| 362 | Dr. Mahesh M. Goyani | Attended One Week STTP on "ANN and Optimization Technique and Applications" at NITTTR Center, Chandigarh from 21.11.2011 to 25.11.2011 |
| 363 | hjspbouh | Mobile Application Development |
| 364 | hjspbouh | DISASTERS AND GIS |
| 365 | Dr. Bharat C. Khatri | Overview of Welding & Brazing, Qualification-ASME BPVC Section IX |
| 366 | Dr. Bharat C. Khatri | Stores & Purchase Management |
| 367 | Dr. Bhaumik R Shah | Disaster & GIS |
| 368 | Dr. Bhaumik R Shah | GPS: Hands-on-Training Programme |
| 369 | Dr. N. G. RAVAL | Urban Transport Modelling |
| 370 | Dr. N. G. RAVAL | Disaster & GIS |
| 371 | Prof.Binita.A.Vyas | GICEA |
| 372 | Prof.Binita.A.Vyas | GTU Research Fair |
| 373 | Prof.Binita.A.Vyas | Past earthquake reconstruction –lessons learnt and way forward |
| 374 | Prof.Binita.A.Vyas | Gender issues in disaster management |
| 375 | hjspbouh | INDUCTION TRAINING PROGRAMME PHASE-1 |
| 376 | SANJAY PRAHLADBHAI PATEL | Energy and Environment management |
| 377 | Dr. VIPULKUMAR JESHANKER UPADHYAY | SIMULATION OF ELECTRICAL CIRCUIT AND SYSTEMS |
| 378 | FADADU KUNALKUMAR VINODBHAI | FREE HEALTH CHECK UP CAMP OF HERO HONDA BIKE |
| 379 | FADADU KUNALKUMAR VINODBHAI | EFFECTIVE TEACHING OUTCOME BASED CURRICULUM |
| 380 | Dr. Bharat C. Khatri | Advance In Manufacturing |
| 381 | Dr. Bharat C. Khatri | Hyperform-Hypermesh Software Training |
| 382 | Dr. Bharat C. Khatri | Installation & Operations Of SOUL 2.0 Software |
| 383 | Hiren Dinker Mehta | Modern Trends in Electric Power System Operation and Control |
| 384 | Prof. Nisha V Bora | Mission 10X training program conducted by WIPRO Technology |
| 385 | Prof. Nisha V Bora | Hyperform - Hypermesh Software Training |
| 386 | SAGAR DHARMENDRA AMBALAL | Design of Steel Structure Using (revised) IS: 800-2007 |
| 387 | Jyoti Iyer | Course on ‘Teaching with MATLAB and Simulink’ |
| 388 | Dr. Mayank I. Vyas | WIND ENERGY |
| 389 | Prof.Binita.A.Vyas | Workshop on Effective Teaching & outcome based curriculum |
| 390 | Prof.Binita.A.Vyas | A course on Strength of Materials |
| 391 | Prof.Binita.A.Vyas | (CCC+)Certificate course in computer concept plus |
| 392 | Prof.Binita.A.Vyas | Training on Mechanics of solids |
| 393 | Dr. Bharat C. Khatri | Sheet Metal Design |
| 394 | Dr. Bharat C. Khatri | CFD & Heat Transfer |
| 395 | Dr. Bhaumik R Shah | Urban Draiange Management : State of art |
| 396 | Prof. Nisha V Bora | CFD and Heat Transfer |
| 397 | Prof. Nisha V Bora | computational Fluid Dynamics - Basic and Application |
| 398 | SAGAR DHARMENDRA AMBALAL | Seismic Design of Steel Structures |
| 399 | SAGAR DHARMENDRA AMBALAL | Engineering Mechanics |
| 400 | SAGAR DHARMENDRA AMBALAL | Mechanics of Solids |
| 401 | Jyoti Iyer | National Workshop on Embedded Systems. |
| 402 | Jyoti Iyer | Workshop on ‘Effective Teaching’. |
| 403 | SANJAY PRAHLADBHAI PATEL | Sheet metal Design |
| 404 | Dr. Mayank I. Vyas | CRYCOOLERS:THEORY, DESIGN, PRACTICES |
| 405 | Dr. Mayank I. Vyas | SHEET METAL DESIGN |
| 406 | Dr. Mayank I. Vyas | COMPUTATIONAL FLUID DYNAMICS & HEAT TRANSFER |
| 407 | Dr. Mayank I. Vyas | LIFE SKILLS FOR ENGINEERS |
| 408 | Dr. Mayank I. Vyas | COMPUTATIONAL FLUID DYNAMICS |
| 409 | Dr. N. G. RAVAL | Certificate Course of CCC+ |
| 410 | Dr. N. G. RAVAL | Advance Techniques in Transportation Engineering |
| 411 | Prof.Binita.A.Vyas | Refresher Course for Design of Ports and Harbor Structures |
| 412 | Prof.Binita.A.Vyas | FEM Applications |
| 413 | Dr. Bharat C. Khatri | Advance Manufacturing System |
| 414 | Dr. Bharat C. Khatri | Strategic Planning, Management & Implementation In Technical Education |
| 415 | Dr. Bhaumik R Shah | Application of Total station in civil Engg |
| 416 | SAGAR DHARMENDRA AMBALAL | Enhancing Teacher Effectiveness Program for Faculty Members |
| 417 | SAGAR DHARMENDRA AMBALAL | Innovation and Creativity Development in Teachers and Students |
| 418 | SAGAR DHARMENDRA AMBALAL | Pile Diaphragms and Anchorages |
| 419 | SAGAR DHARMENDRA AMBALAL | Teaching Competency Awareness Development Program |
| 420 | SAGAR DHARMENDRA AMBALAL | Earthquake Resistant Design of RC Buildings |
| 421 | Jyoti Iyer | Workshop on DSP in Electrical Engg. Applications. |
| 422 | Jyoti Iyer | Workshop on ‘Energy Conservation Awareness’. |
| 423 | Jyoti Iyer | Workshop on ‘Faculty Development for Institutional Reforms’ |
| 424 | Jyoti Iyer | Workshop on ‘Health Assessment of Electrical Installations’. |
| 425 | Jyoti Iyer | Workshop on ‘Modern Computational Techniques in Power System’. |
| 426 | Jyoti Iyer | Recent trends in Power System Operation and Control. |
| 427 | SANJAY PRAHLADBHAI PATEL | Analaysis of morden manufacturing process |
| 428 | Dr. Mayank I. Vyas | FACULTY DEVELOPMENT FOR INSTITUTIONAL REFORMS |
| 429 | Dr. Mayank I. Vyas | MODERN CONCEPT IN AIR CONDITIONING DESIGN |
| 430 | Dr. Mayank I. Vyas | ENERGY MANAGEMENT |
| 431 | Dr. VIPULKUMAR JESHANKER UPADHYAY | DESIGN ANALYSIS AND CONTROL OF ADVANCED ELECTRICAL MACHINES |
| 432 | Prof.Binita.A.Vyas | Trends and Practices in concrete today |
| 433 | Prof.Binita.A.Vyas | Workshop on Industrial Structures & Facilities |
| 434 | Prof.Binita.A.Vyas | Workshop for Faculty Development on Institutional reforms |
| 435 | Dr. Bharat C. Khatri | Orientation Programme for newly recruited faculties |
| 436 | SAGAR DHARMENDRA AMBALAL | Evaluation, Repairs and strengthening Structures |
| 437 | SAGAR DHARMENDRA AMBALAL | Basic Structural Dynamics |
| 438 | Jyoti Iyer | Training Program on ‘Office Procedure and Service Rules’ |
| 439 | Dr. UTPAL VINODCHANDRA SHAH | Govt. Purchase and Store |
| 440 | Dr. UTPAL VINODCHANDRA SHAH | FEA & its application |
| 441 | SANJAY PRAHLADBHAI PATEL | Advances in Referigeration and air conditioning |
| 442 | SANJAY PRAHLADBHAI PATEL | Finite element analysis and its applications |
| 443 | SANJAY PRAHLADBHAI PATEL | Workshop on BAZA SAE India vehicale design |
| 444 | SANJAY PRAHLADBHAI PATEL | Government purchase and stores |
| 445 | Dr. Mayank I. Vyas | INTRODUCTION TO COMPUTATIONAL FLUID DYNAMICS |
| 446 | Dr. Mayank I. Vyas | OFFICE PROCEDURE AND SERVICE RULES |
| 447 | Dr. N. G. RAVAL | Earthquake Resistant Design of RC Buildings |
| 448 | Dr. N. G. RAVAL | Geotechnical Earthquake Engineering |
| 449 | Prof.Binita.A.Vyas | Personality Development |
| 450 | Prof.Binita.A.Vyas | Nano science and nano technology |
| 451 | Prof.Binita.A.Vyas | Basic Structural Dynamics |
| 452 | Prof.Binita.A.Vyas | Design of underground and elevated reservoirs. |
| 453 | Dr. Bharat C. Khatri | Sensitization and Orientation of teachers to meet the requirements of modern times |
| 454 | Dr. Bhaumik R Shah | National Programme for capacity Building in Earthquake Risk Management (Part 2 |
| 455 | SAGAR DHARMENDRA AMBALAL | National Program for capacity building of Engineers in E.Q. Risk Management. |
| 456 | SAGAR DHARMENDRA AMBALAL | Environment and Disaster Management |
| 457 | Jyoti Iyer | Training Program on MiPower Power System Analysis software package. |
| 458 | Jyoti Iyer | Training on ‘MATLAB for Electrical Engineering’. |
| 459 | Dr. Mayank I. Vyas | STRESS MANAGEMENT |
| 460 | Dr. N. G. RAVAL | An Integrated Approach to the Quality Systems and Engineering |
| 461 | Dr. N. G. RAVAL | Teaching Methodology for Construction Technology & Structures |
| 462 | Dr. VIPULKUMAR JESHANKER UPADHYAY | MATLAB FOR ELECTRICAL ENGG. |
| 463 | Prof.Binita.A.Vyas | IITK - GSDMA guidelines for seismic design of liquid storage tanks |
| 464 | Dr. Bhaumik R Shah | National Programme for capacity Building in Earthquake Risk Management (Part 1) |
| 465 | Hiren Dinker Mehta | Preparation for NBA |
| 466 | Hiren Dinker Mehta | Workshop on NBA |
| 467 | Hiren Dinker Mehta | Recent trends in power system protection |
| 468 | SAGAR DHARMENDRA AMBALAL | Programming in “JAVA” |
| 469 | SAGAR DHARMENDRA AMBALAL | Structural Steel design |
| 470 | SAGAR DHARMENDRA AMBALAL | Entrepreneurship Development through Innovative Techniques in Civil & Architecture Engineering |
| 471 | SAGAR DHARMENDRA AMBALAL | National Program for capacity building of Engineers in E.Q. Risk Management. |
| 472 | Jyoti Iyer | Training Program on ‘Gender Issues’. |
| 473 | Dr. UTPAL VINODCHANDRA SHAH | Human Values in Technical Education |
| 474 | SANJAY PRAHLADBHAI PATEL | Alternative fuels and emission control |
| 475 | Dr. Mayank I. Vyas | HELPING STUDENTS BETTER LEARNING SKILL & HABIT FOR HUMAN VALUE IN EDUCATION |
| 476 | Hiren Dinker Mehta | Modern trends in Power electronics and drives |
| 477 | Hiren Dinker Mehta | MATLAB for analysis and simulation of electrical, electronics and control systems |
| 478 | SAGAR DHARMENDRA AMBALAL | Induction Training Program on Computer Science |
| 479 | SAGAR DHARMENDRA AMBALAL | Earthquake Resistant Design and Construction of R.C.C. Structures |
| 480 | Prof. Nisha V Bora | S & T Faculty Development Program ( WED ) |
| 481 | Dr. UTPAL VINODCHANDRA SHAH | Design Methodology |
| 482 | SANJAY PRAHLADBHAI PATEL | Design methodology |
| 483 | Dr. Mayank I. Vyas | DESIGN OF PLASICE PRODUCTS AND MOULDS THROUGH PRO-E |
| 484 | Dr. Mayank I. Vyas | ADVANCED COMPUTATIONAL TECHNIQUES [ACT-2003] |
| 485 | SAGAR DHARMENDRA AMBALAL | Earthquake Resistant Design and Retrofitting of R. C. Buildings |
| 486 | Jyoti Iyer | Workshop on Management of Personal Finances. |
| 487 | SANJAY PRAHLADBHAI PATEL | Workshop on Computer based diesel engine test rig |
| 488 | SANJAY PRAHLADBHAI PATEL | Application of artificial intelligence in mechanical engineering |
| 489 | SANJAY PRAHLADBHAI PATEL | Condition monitoring of plant Equipment |
| 490 | Dr. VIPULKUMAR JESHANKER UPADHYAY | REFRESHER COURSE IN MATERIAL SCIENCE |
| 491 | Prof.Binita.A.Vyas | Seismic Design of Bridges |
| 492 | Prof.Binita.A.Vyas | Govt. Purchase & stores |
| 493 | Prof.Binita.A.Vyas | Structural Dynamics |
| 494 | Prof. Samruddhi Patel | Induction Training Programme Phase –II |
| 495 | Jyoti Iyer | Strategic Planning Workshop |
| 496 | Jyoti Iyer | Training Programme on Student Counselling. |
| 497 | Jyoti Iyer | Computer Awareness Program . |
| 498 | Jyoti Iyer | Strategic Planning Group workshop. |
| 499 | Jyoti Iyer | Training in Life Skills Workshop. |
| 500 | Prof.Binita.A.Vyas | Seismic design and Retrofitting of reinforced concrete building |
| 501 | Prof.Binita.A.Vyas | Evaluation, Repair and Rehabilitation of distressed structures |
| 502 | Prof.Binita.A.Vyas | CP-2001, Cleaner production in chemical Industry |
| 503 | Prof.Binita.A.Vyas | Seismic Effects on soil foundation structure-interaction and mitigation methods |
| 504 | Prof.Binita.A.Vyas | A step towards Seismic Resistance of Building: Design of Steel Concrete Composites |
| 505 | Prof.Binita.A.Vyas | Rapid Safety Evaluation Assessment of Distressed Structures |
| 506 | Hiren Dinker Mehta | Energy Conservation, Audit and Demand Management |
| 507 | SAGAR DHARMENDRA AMBALAL | Application of professional software in Structural Engineering |
| 508 | SAGAR DHARMENDRA AMBALAL | Non Destructive Testing of Concrete in Structures |
| 509 | Jyoti Iyer | Women in Development ((WID) Reps. Workshop. |
| 510 | Jyoti Iyer | Women in Development ((WID) Reps. Workshop. |
| 511 | Dr. UTPAL VINODCHANDRA SHAH | Entrepreneurship Development in None-conventional Energy Sources |
| 512 | Dr. VIPULKUMAR JESHANKER UPADHYAY | ENERGY CONSERVATION AUDIT & DEMAND MANAGEMENT |
| 513 | Dr. VIPULKUMAR JESHANKER UPADHYAY | STAFF INDUCTION TRAINING PROGRAM |
| 514 | Prof.Binita.A.Vyas | Modern methods of analysis and design of foundation and super structures |
| 515 | Prof.Binita.A.Vyas | Non-Destructive testing of Concrete Structures |
| 516 | Prof.Binita.A.Vyas | Application of software for static & dynamic analysis in structural Engg. |
| 517 | Prof.Binita.A.Vyas | Application of Professional Software in Structural Engg. |
| 518 | Prof.Binita.A.Vyas | Career Fair |
| 519 | Dr. Mayank I. Vyas | TECHING METHODOLOGY |
| 520 | Jyoti Iyer | Energy Auditing, Conservation and Prevention of Energy Pilferage. |
| 521 | Dr. UTPAL VINODCHANDRA SHAH | Advances in Manufacturing |
| 522 | Dr. UTPAL VINODCHANDRA SHAH | Pumping systems, Selection, Performance, Testing & Latest Advances |
| 523 | Prof.Binita.A.Vyas | Advances in Concrete |
| 524 | Jyoti Iyer | AICTE Summer School on Orientation Programme |
| 525 | Prof.Binita.A.Vyas | Orientation Programme |
| 526 | Prof.Binita.A.Vyas | Application of non-destructive testing in Civil Engineering |
| 527 | Prof.Binita.A.Vyas | Construction Admixture |
| 528 | Prof.Binita.A.Vyas | Computer aided drafting using AutoCAD |
| 529 | Prof.Binita.A.Vyas | Habitat-Softer opinions |
| 530 | Prof.Binita.A.Vyas | Design fundamentals |
| 531 | Dr. UTPAL VINODCHANDRA SHAH | W3 - Course outcomes and domains of learning |
| 532 | Dr. UTPAL VINODCHANDRA SHAH | NBA Accreditation |
| Sr. No. | Faculty Name | Expert Lectures Delivered by Faculty |
|---|---|---|
| 1 | Dr. Hirenkumar Rameshbhai Prajapati | Basics of Machine Design |
| 2 | Archana Bharatbhai Gondalia | Concepts of Domain Name System, DNA Servers, etc |
| 3 | Archana Bharatbhai Gondalia | One Day State Level Cyber awareness program on Cyber Security and Cyber Law |
| 4 | Dr. B J Shah | AICTE ATAL Online Training conducted by GEC, Dahod from 21-25/09/2020 |
| 5 | Dr. B J Shah | Online webinar conducted by Govt. Engg. College, Surat (28/05/2020) |
| 6 | Dr. B J Shah | Online webinar conducted by L. D. College of Engineering, Ahmedabad (30/04/2020) |
| 7 | Dr. Bhaumik R Shah | GUJCOST sponsored workshopon " Nanotechnology Applications in water & Wastewater Treatment |
| 8 | Dr. Dipak J. Prajapati | This expert lecture was delivered in STTP organized by Mathematics Department in LDRP Institute, Gandhinagar. |
| 9 | Prof. Manisha Valera | Conducted Expert talk on Python Programming for final year CE, CSE,IT Students. |
| 10 | Hiren Dinker Mehta | Multi-objective optimization using NSGA |
| 11 | Hiren Dinker Mehta | Genetic Algorithms and Particle Swarm Optimization |
| 12 | Bhavik Arvindbhai Brahmbhatt | . |
| 13 | Safvan Vahora | Expert session conducted on “Deep Learning” on 29th February, 2020 at A. D. Patel Institute of Technology, New V. V. Nagar in one day workshop on “Deep Learning : A Programmer’s View”. |
| 14 | Dr. Ankit J Patel | Discussion on important parameter of buildings |
| 15 | Dr. B J Shah | Training programs for engineers of SWDC, Govt. of Gujarat, Gandhinagar (06/07/2019) |
| 16 | Dr. B J Shah | GUJCOST sponsored workshop on Advances in Earthquake Engineering (22/03/2019) |
| 17 | Dr. Ankit J Patel | 14/2/2018 at Grow more institute |
| 18 | Dr. Ankit J Patel | 4/1/2018 at shankersinh vaghela bapu institute of technology |
| 19 | Hiren Dinker Mehta | Multi-objective optimization using NSGA |
| 20 | Dr. N. G. RAVAL | Organized for Assistant Engineers |
| 21 | Dr. N. G. RAVAL | Organized for Assistant Engineers |
| 22 | Dr. N. G. RAVAL | For all Faculty Members |
| 23 | Dr. Hirenkumar Rameshbhai Prajapati | Introduction to Vibrations |
| 24 | Dr. B J Shah | Training program on Emerging Trends in Structural & Geotechnical Engineering (ETSGE 2018) organized by Directorate of Technical Education, Gujarat State, Ganghinagar. (02/08/2018) |
| 25 | Jyoti Iyer | In the VC-STTP |
| 26 | Jyoti Iyer | In the VC- STTP |
| 27 | Dr. Mahesh M. Goyani | Delivered Expert talk on "Optimal Feature Selection using Dimension Reduction" in 2 Week STTP on "Applications of Optimization Techniques in Engineering for Research" at Government Engineering College, Modasa on 07-01-2017. |
| 28 | Dr. Mahesh M. Goyani | Delivered Expert talk on "Feature Selection using Dimension Reduction" in One Week STTP on "Recent Trends and Advancements in ICT" at SSEC, Bhavnagar on 16-02-2017. |
| 29 | Dr. Mahesh M. Goyani | Delivered Expert talk on "Technical Report Writing and Authoring Research Manuscript with LaTeX" in Three Day Workshop at Smt. S.R.Patel Engineering College, Unjha on 25-06-2017 and 26-06-2017. |
| 30 | Prof. K S Banker | Delivered Expert talk on CNC programming at Grow more Institute of Technology, Himmatnagar on 11th September 2017 |
| 31 | Hiren Dinker Mehta | Basics of GA, PSO, TLBO & NSGA |
| 32 | Hiren Dinker Mehta | Particle Swarm Optimization and its Applications |
| 33 | Dr. Mahesh M. Goyani | Delivered Expert talk on "Various Techniques to Solve Traveling Salesman problem" under Summer School at L D College of Engineering on 28-06-2016. |
| 34 | Dr. Mahesh M. Goyani | Delivered Expert talk on "Video Indexing and Automatic Highlight Generation from Sports Video" at Government Engineering College, Modasa, on 15-09-16 |
| 35 | Hiren Dinker Mehta | Genetic Algorithms and TLBO |
| 36 | Hiren Dinker Mehta | Particle Swarm Optimization and its Applications |
| 37 | Dr. Bharat C. Khatri | Delivered Expert talk on "Manufacturing & Automation CNC" at RCTI, Ahmedabad on 11/05/2015 |
| 38 | Dr. Bharat C. Khatri | Delivered Expert talk on " Industrial Hygiene" at GEC, Bhuj on 12/06/2015 |
| 39 | Dr. Mahesh M. Goyani | Delivered Expert talk on "A Closer Look @ Image" at Government MCA College, Maninagar, Ahmedabad on 11-03-2015. |
| 40 | Dr. Mahesh M. Goyani | Delivered Expert talk on "A Closer Look @ Image" at GMCA, Ahmedabad, on 11-03-15 |
| 41 | Hiren Dinker Mehta | Genetic Algorithms and its Applications |
| 42 | Hiren Dinker Mehta | Genetic Algorithms and its Applications |
| 43 | Hiren Dinker Mehta | Power Systems Analysis |
| 44 | Dr. Hirenkumar Rameshbhai Prajapati | Balancing of machines |
| 45 | Hiren Dinker Mehta | Power Systems Analysis |
| 46 | Hiren Dinker Mehta | Genetic Algorithms and its Applications |
| 47 | Dr. Hirenkumar Rameshbhai Prajapati | Balancing of machines |
| 48 | Hiren Dinker Mehta | Microprocessor and its Application |
| 49 | Dr. Bharat C. Khatri | Delivered Expert talk on " CNC Programming using MasterCam" at L. D. College of Engineering, Ahmedabad on 21/11/2013 |
| 50 | Dr. Mahesh M. Goyani | Delivered Expert talk on "Graphics Output Primitives" at Government Engineering College, Bhavnagar, on 26-03-12 |
| 51 | Dr. Mahesh M. Goyani | Delivered Expert talk on "Pointers & File Handling in C" under ISTE Approved 2 Week STTP on "Emerging Trends in C Programming" at SVMIT, Bharuch, on 19-04-12 |
| 52 | Dr. Mahesh M. Goyani | Delivered Expert talk on "Structures and Unoion in C" under ISTE Approved 2 Week STTP on "Emerging Trends in C Programming" at SVMIT, Bharuch, on 18-04-12 |
| 53 | Dr. Mahesh M. Goyani | Delivered Expert talk on "Video Indexing" at G H Patel College of Engineering and Technology, V.V.Nagar, under ISTE Staff Chapter on 14-03-11 |
| 54 | Dr. Mahesh M. Goyani | Delivered One Day Seminar on "Basics of Advanced Computer Algorithms" at LDRP - ITR, Gandhinagar, under IEEE Student Branch on 12th March 2010. |
| 55 | Dr. Mahesh M. Goyani | Delivered Expert Lecture on "Real Time Operating System", under ISTE Student Branch at G H Patel College of Engineering and Technology, V.V.Nagar on 19th Feb 2009. |
| 56 | Dr. Mahesh M. Goyani | Delivered Expert Lecture on "Real Time Operating System - Concept and Scheduling Algorithms" at B & B Institute of Technology, V.V.Nagar on 24th March 2009. |
| 57 | Dr. Kuntesh K Jani | Expert Talk in IEEE Gujarat Section Event |
| Sr. No. | Conferences Attended/Chaired by Faculty |
|---|---|
| 1 | Dr. B. J. Shah, Professor in Applied Mechanics, attended the International conclave on Higher Education organized by Education department, Govt. of Gujarat on 18th Oct., 2016 as part of pre-summit of Vibrant Gujarat 2017. He also worked as Nodal Ofcer for the Banner committee in the conclave. |
| 2 | Dr. B. J. Shah, Professor in Applied Mechanics, worked as member of advisory committee for preparation of proposal for development of Post graduate Research Centre, CITWM (Centre for Infrastructure Transportation and Water Management) of GTU. |
| 3 | Dr. B. N. Suthar, Associate Professor in Electrical Engg., was session chair in Electrical Engg. in the International conference on Research, Innovation, Science and Technology, ICRISET at Vallabh Vidyanagar, Gujarat 17th to 19th Feb., 2017. |
| 4 | Dr. B. N. Suthar, Associate Professor in Electrical Engg., attended a two day workshop on "Introduction to robotics and embedded system" held at IITRAM, Ahmedabad from 18th to 19th Nov., 2016. |
Government Engineering College, Modasa was established in 1984 under the Directorate of Technical Education, Gujarat State, Gandhinagar in North Gujarat region with a view to spread out technical education in the region and hence promote industrial development. The institute was affiliated with Hemchandracharaya North Gujarat University (HNGU), Patan from 1984 to 2007. The institute is affiliated to Gujarat Technological University, Ahmedabad from 2008. It is recognized by All India Council for Technical Education (AICTE), New Delhi.
2017 © All Rights Reserved. | GEC, MODASA | Visit Count:16916 | Last updated on: